SKYPE FOR BUSINESS MAC LOGIN HOW TO
SKYPE FOR BUSINESS MAC LOGIN SERIES
SKYPE FOR BUSINESS MAC LOGIN WINDOWS

Reboot the server to apply the new computer name.

Enter the same DNS domain and suffix used by the internal SfB Front End server so that the Edge Server is configured with an FQDN.

View the serverвЂ™s System Properties and use the More button under Computer name field to access the following window.

This is a commonly missed step that leads to troubleshooting installation issues further down the line.

Configure Computer NameДЄs covered in the other article it is critical to set the proper Fully Qualified Domain Name (FQDN) on this server so that the server component installation will function correctly. Clearly this is safe in a lab environment but if the Edge serverвЂ™s external interface is to be routed to the Internet than a different approach may be advisable. If Remote Desktop connectivity is lost after moving the default gateways as shown above then connect to the server console and either define a required static route to back to the network where the remote console is, or if that console is actually in the вЂExternalвЂ™ network then check the firewall configuration to allow remote desktop connections to the external interface.

Review the current IPv4 configuration on both the Internal and External interfaces and configure the default gateways as appropriate.

This is a normal practice in environments with multiple routed internal networks but unnecessary in a standalone lab environment like what is used in this example. This topic is covered in more detail in the Edge Pool deployment article which outlines creating up to three new persistent static routes to tell the server to use the internal router to locate hosts on any of these reserved IP address ranges. To prevent this problem then some persistent static routes are required. The server cannot have multiple default gateways defined yet moving the serverвЂ™s default gateway to the external interface might break communications with hosts on other routed internal networks than the one it is directly connected to. In order to allow normal communications typically the internal interface would have been configured with the default gateway set to the routerвЂ™s IP address for that segment and the external interface would not yet have a default gateway set. The existing server has been prepared with two network interfaces connected to two separate IPv4 networks. Make sure to open and test the required ports and protocols before attempting to deploy and start the Edge Server services. The rules required to allow communications to and from the Edge Server across either network are covered in the Edge Pool article which can be used as a reference. The two networks do not have access to each other except for any explicitly defined firewall rules.

The network topology of the lab environment used for all the articles in this deployment series simply consistent of two physically separated network segments.ДЄ single firewall with separate network interfaces provides connectivity for each network segment to the Internet.

These are basic requirements for an Edge Server and must be met in order to move forward with a successful deployment.

The baseline for this deployment is a new Windows Server 2012 R2 installation that is not joined to any Active Directory domain and is connected to two separate IPv4 networks.

Because the Edge Pool article goes into great depth on topics and step-by-step directions this article will omit some of the basic instructions on how to get to specific windows and focus on just the important aspects. Nearly all of the guidance in the companion article related to network configuration and server preparation holds true for either scenario.ДЄlso worth pointing out is that if one is attempting this deployment then a fair amount of Windows server and networking knowledge is assumed.

Basically the other servers as a production deployment reference guide while this is the quick reference guide for lab deployments. This other article addresses the more complex topic of deploying multiple Edge servers in production-like setting, but also includes additional guidance and can be used as a deeper reference to the topics covered in this shorter article. A much more detailed companion article entitled Skype for Business 2015 Edge Pool Deployment is also available which overlaps with a lot of the concepts and steps in this article. The instruction in this article is without much of the typical in-depth explanation provided alongside most deployment articles on this blog. This article is intended for those following along with this series of deployment articles to create a Skype for Business (SfB) 2015 Server environment.

SKYPE FOR BUSINESS MAC LOGIN SERIES

SKYPE FOR BUSINESS MAC LOGIN WINDOWS

SKYPE FOR BUSINESS MAC LOGIN HOW TO

Skype for business mac login